What Solar Panel Removal Costs in Dallas–Fort Worth
Real ranges, the factors that move them, and how to tell a fair quote from a bad one. Updated for 2026.
Most solar companies make you fill out a form to find out what anything costs. We'd rather you walk in knowing the numbers, so here they are.
Typical DFW price ranges
These are the ranges homeowners in the Dallas–Fort Worth market generally see for residential rooftop arrays. Your written quote from us will be a firm number, not a range — this is here so you know whether the quotes you're collecting are in the right neighborhood.
| Scope of work | Typical DFW range | Per panel |
|---|---|---|
| Removal only (panels not going back) | $800 – $2,000 | ~$75 – $125 |
| Removal + reinstall, small array (10–15 panels) | $1,800 – $3,500 | ~$175 – $250 |
| Removal + reinstall, typical array (16–28 panels) | $2,800 – $6,000 | ~$175 – $275 |
| Removal + reinstall, large or complex array (30+) | $5,500 – $9,000+ | ~$200 – $300 |
| Partial removal (one roof plane, leak repair) | $600 – $1,800 | varies |
The short version: most DFW homeowners doing a roof replacement with a normal-sized array land somewhere between $2,500 and $5,500 for the full remove-and-reinstall. If someone quotes you $900 for that work, something is being left out — usually the reinstall, the new flashing, or the insurance.
The seven things that actually move your price
1. Panel count
The biggest single driver, and the most predictable. Labor scales almost linearly with how many modules have to come off and go back on.
2. Roof pitch and height
A walkable 4:12 single story is a very different job from a 10:12 two story. Steep and tall means fall protection, slower movement, more crew, and higher insurance exposure. This can swing a quote by 30% or more on the same panel count.
3. Roof surface
Composition shingle is the easy case. Tile and slate are slower and more fragile — broken tiles are a real cost. Standing seam metal often uses clamp mounts, which can actually be quicker.
4. String inverter vs. microinverters
Microinverters or DC optimizers mean electronics mounted behind every panel, each one individually connected. More components, more connections to break down and rebuild, more labor.
5. How long the panels are in storage
A remove-Monday, reinstall-Thursday job is one mobilization plan. Panels sitting for six weeks because the roof job slipped means storage, re-handling, and a second scheduling window.
6. Flashing and mounting hardware
Reinstalling on a new roof should always mean new mounting feet and new flashing. That's materials plus labor, and it is not the place to save $200. Any quote that reuses old flashing on a new roof is buying you a future leak.
7. Permits and inspection
Some North Texas cities require a permit for a removal and reinstall; some treat it as maintenance. Where a permit is required, expect a permit fee and a scheduling delay for inspection.
What should be in a quote — and what shouldn't be missing
A quote worth trusting spells out all of this:
- Panel count and the specific roof planes covered
- Removal and reinstall as separate, visible line items
- New flashing and mounting hardware, stated explicitly
- Where the panels will be stored and for how long
- Electrical shutdown, reconnection, and commissioning — verifying the system produces again
- Permit fees, or a clear statement that no permit is required in your city
- Proof of liability and workers' compensation insurance
Red flags: a verbal-only price; no mention of commissioning; “we'll reuse your existing flashing”; no certificate of insurance; a price far below everyone else's; or a roofing crew offering to pull the panels themselves as a freebie. That last one is the most expensive mistake in this whole category — see why panels are their own trade.
Is it cheaper if my roofer handles everything?
Sometimes the roofer will bundle it, and that's fine — but they're subcontracting the panel work to a company like ours and marking it up. Bundling buys you one point of contact and one invoice. Hiring the solar contractor directly usually saves you the markup. Neither is wrong; just know which one you're doing.
Does insurance pay for any of this?
Frequently, when the roof replacement itself is a covered claim — hail is the usual reason in North Texas. Removal and reinstall is often included in the roof scope, but it is not automatic, and it commonly has to be requested as a supplement. Full detail on our insurance and hail damage page.
What our other services run
| Service | Typical DFW range |
|---|---|
| Panel cleaning | $8 – $20 per panel, with a service minimum |
| Maintenance / diagnostic visit | $150 – $400 depending on scope |
| Critter guard installation | $500 – $1,800 depending on array perimeter |
Send us a couple of ground-level photos of your roof and a rough panel count, and we'll come back with a firm written number — usually within 24 hours.
Frequently Asked Questions
How much does it cost to remove and reinstall solar panels in Dallas?
Most Dallas-Fort Worth homeowners with a typical residential array pay roughly $2,500 to $5,500 for a full removal and reinstall tied to a roof replacement. Smaller arrays on simple single-story roofs can come in under $2,500, and large or steep multi-plane arrays can exceed $6,000. Panel count, roof pitch, and roof height are the three biggest drivers.
How much does it cost per panel?
Removal and reinstall together generally works out to about $175 to $300 per panel in the DFW market. Removal only, where the panels are not going back up, is typically $75 to $125 per panel. Per-panel math gets less accurate at the extremes, since a very small job still carries a minimum and a very large job gets some efficiency.
Why is removal only cheaper than removal and reinstall?
Because reinstall is the harder half. Putting an array back means new mounting feet, new flashing, rails re-set to the original layout, every electrical connection rebuilt and torqued to specification, and the system commissioned and verified to be producing. Removal is mostly disassembly; reinstall is a full build.
Can I remove my own solar panels to save money?
We would strongly advise against it. Panels produce live DC voltage whenever the sun is up and cannot simply be switched off, the work happens at height, and doing it yourself will likely void manufacturer warranties on the panels, inverter, and racking. The savings are small relative to the risk of injury, a damaged array, or a denied warranty claim.
Do you charge for a quote?
No. Quotes are free and we usually turn them around within 24 hours. Photos of your roof from the ground plus a rough panel count are enough to get you a number in most cases.
Will you match a lower quote?
Send us the other quote and we will tell you honestly whether it is a fair price or whether something is missing from the scope. Very low bids in this trade usually leave out the reinstall, the new flashing, the commissioning step, or the insurance.
Get a Free Quote
Tell us what you need and we'll get back to you. Most quotes go out within 24 hours.
Contact Information
Whether you need a quick cleaning or a full uninstall and reinstall before a roof replacement, we've got you covered across the Dallas–Fort Worth Metroplex.